amphenol canada corp. ref. scale size project dwg. no. a3 sheet rev. 1x1 sfp+ cage, spring finger gasket with latch for light pipe date approvals drawn checked qa appd ie app'd dwg app'd unless otherwise specified dimensions are in millimeters tolerances are: decimals angles 0.15 x.x 0.10 x.xx material and finish designed title code ident. no. 03554 0.5 h.song j.si 1 of 3 3:1 b aug26/09 P-U77-A1639-X001 aug27/09 11.50 10.00 (typ.) 37.10 11.26 9.65 2 = nickel 3 = matte tin 0 0 1 amphenol part number configuration u 7 7 - a 1 6 3 9 - x cage plating: packaging: 1 = tray packaging sfp+ press fit cage 16.26 14.50 temperature range: -40c to 85c. plating option 3: 2.54 - 7.62 m [100 - 300 "] packaging: tray packaging. matte tin plating over 1.27 m [ 50 "] nickel. material: cage: copper alloy. plating: plating option 2: 2.54 m[100 "] nickel plating. revisions rev description date apprd a proposal aug27/09 b proposal may 6'11 j.si or used for manufacturing puposes without permission from amphenol canada corp. d c b a a b c d do not scale drawing 1 2 3 4 5 6 8 8 7 6 5 4 32 1 this document contains proprietary information and such information may not be disclosed to others for any purpose 7 8.950.15 (typ.) (typ.) 0.10 14.00 14.25
amphenol canada corp. ref. scale size project dwg. no. a3 sheet rev. 1x1 sfp+ cage, spring finger gasket with latch for light pipe date approvals drawn checked qa appd ie app'd dwg app'd unless otherwise specified dimensions are in millimeters tolerances are: decimals angles 0.15 x.x 0.10 x.xx material and finish designed title code ident. no. 03554 0.5 h.song j.si 2 of 3 3:1 b aug26/09 P-U77-A1639-X001 aug27/09 section a-a pcb (panel cut 0.30 3.50 0.90 1.70 10.40 below pcb) 0.10 0.10 0.25 1.57 recommended bezel design revisions rev description date apprd a proposal aug27/09 b proposal may 6'11 j.si or used for manufacturing puposes without permission from amphenol canada corp. d c b a a b c d do not scale drawing 1 2 3 4 5 6 8 8 7 6 5 4 32 1 this document contains proprietary information and such information may not be disclosed to others for any purpose 7 16.25 min 15.450.10 a a
amphenol canada corp. ref. scale size project dwg. no. a3 sheet rev. 1x1 sfp+ cage, spring finger gasket with latch for light pipe date approvals drawn checked qa appd ie app'd dwg app'd unless otherwise specified dimensions are in millimeters tolerances are: decimals angles 0.15 x.x 0.10 x.xx material and finish designed title code ident. no. 03554 0.5 h.song j.si 3 of 3 3:1 b aug26/09 P-U77-A1639-X001 aug27/09 0 0 4.50 10.00 20.00 22.80 27.50 30.00 32.50 37.10 5.00 15.00 25.00 30.90 35.00 14.25 7.13 2.33 11.93 5.68 8.58 11.08 (see note 1) bsc l -v- s 0.1 z x x s z v w detail b scale 4 : 1 -w- l 0.06 0.1 l 0.06 l w v 1.550.05 9.60 1.00 (20 plcs) 0.03 0.50 (typ.) (20 plcs) 0.03 2.00 4.10 4.10 0.80 1.40 1.550.05 b (traces allowed) components keep-out this area denotes (except chassis ground) trace keep-out denotes component and cross-hatched area x x s z x m z 0.1 s m -z- 0.1 x y s z x m 0.1 0.1 m y c 0.05 (10 plcs) 1.05 0.85 (plated hole) 0.05 0.00 1.05 0.95 (9 plcs) 0.95 0.85 hole sizes 1.55 1.05 4. see drawing p-u76-a20-x00xx for connector layout. 3. notes: datum and basic dimensions established by customer. 1. pads and vias are chassis ground. 2. thru-holes plating optional. revisions rev description date apprd a proposal aug27/09 b proposal may 6'11 j.si detail c scale 6 : 1 2.00 1.05 0.10 (typ.) 2.000.10 (typ.) or used for manufacturing puposes without permission from amphenol canada corp. d c b a a b c d do not scale drawing 1 2 3 4 5 6 8 8 7 6 5 4 32 1 this document contains proprietary information and such information may not be disclosed to others for any purpose 7
|